MADE IN TAIWAN   PATENT NO. M324401
  PATENT NO. D122247



Optimized design for both liquid cooling and air cooling system
Sliding hood with toolbox on top. (Upgradable to LCS.)
10 PCI slots design for quad-graphic card configuration
Tool free design for 5.25” device and PCI slot
Sliding motherboard tray
Independent thermal management for CPU, VGA & HDD
Cable management system for better cable routing and internal air flow
Evolutionary adjustable PSU supporting bridge
Micro-ATX, ATX, Extend-ATX supported
   


Organized HDD cable management
Support up to 14 drive bays
(7 5.25 and 7 3.5 device)
Sliding Motherboard tray
 
 

High efficiency HDD cooling module

23 cm fan installed for extra VGA cooling

Swappable HDD module/ Fan module

Swappable VGA fan holder

Extra bottom space for better expandability. (After HDD/Fan module removed)
Removable HDD cage
7 Modularized HDD tray
7 5.25 slot-in to lock device.
Adjustable PSU supporting bridge
10 Screwless PCI slots with preserved screw holes


  HDD (intake):
140 x 140 x 25 mm blue LED fan, 1000 rpm, 16dBA or
120 x 120 x 25 mm fan

  HDD (intake):
140 x 140 x 25 mm blue LED fan, 1000 rpm, 16dBA or 120 x 120 x 25 mm fan.
Front (intake):
140 x 140 x 25 mm fan 1000 rpm, 16 dBA or
120 x 120 x 25 fan
Bottom (intake) :
Two 140 x 140 mm fans or
Two 120 x 120 mm fans
Side (intake):
230 x 230 x 20 mm
blue LED fan, 800 rpm, 15dBA
Honeycombed opening


140 x 140 x 25 mm,
1000 rpm, 16dBA
--
120 x 120 x 25 mm,
1300 rpm, 17dBA
Bottom (intake) :
140 x 140 x 25 mm Fan,
1000 rpm, 16 dBA or
120 x 120 x 25 mm Fan,
1300 rpm, 17 dBA
Front (intake) :
140 x 140 x 25 mm Fan, 1000 rpm, 16dBA or
120 x 120 x 25 mm Fan, 1300 rpm, 17dBA

VGA (intake) :
140 x 140 x 25 mm Fan, 1000 rpm, 16dBA or
120 x 120 x 25 mm Fan, 1300 rpm, 17dBA